Post pics of your setup

  • Thread starter Thread starter RyanD
  • Start date Start date
DSC00254.jpg

didn't get to take the rest of the studio's picture. will have the the production table picture up shortly.
 
how tall are you ddub? those setups looks hella low. you ever get back aches?

i wish my record collection looked like that. good sh*t
 
doctorfunk said:


super sweet setup brotha, thats an awful lot of vynil.
Click to expand...

Yeah, its a pain to keep up with sometimes though. Half of thosee need to be cleaned and a lot more have to be put into my database.

But hell, I just bought some more today. :p
 
Last edited by a moderator:
dj deflation,

006.JPG


I've been looking for a shelf\table like the one where you keep your 1200's on. Where'd you get it?
 
bumboclott said:


I've been looking for a shelf\table like the one where you keep your 1200's on. Where'd you get it?
Click to expand...

I built it myself. It was real simple, took about 2 hours to cut, build, and stain. Want the specs?

I also built the shelf for the 7"s. Both are real handy and cheap. The one for the turntables cost me about $20 and the 7" about $5.
 
Last edited by a moderator:
48" long
30" tall
16.5" deep

I built it out of scrap plywood and put it together with 3" black screws. I used 11 peices of plywood in all, but if you can, id just use 5. The black top is some engineered board from Lowes that I got for about $12. Screws were about $3 and stain was $4. Took about 2 hours to cut and peice together, and then another hour to stain. I put the top peice on last after it was dry. The thing weighs a ton though, and it is super sturdy. 12" vinyl fits in it great. Let me know if you need a more detailed explanation, im happy to help.
 
Thanks for that. But, I don't see how you used 11 pieces of wood. Can you also tell me if the table shakes at all while sifting through records?

This is gonna be kind of tough for me. I haven't built anything out of wood before. don't even have a good drill. How thick is the wood? You think I can just go to Home Depot and have them make the cuts for me?
 
I just bought a load of new sh!t from Ikea for my decks, but once I got home I decided I didn't like it. I can not be bothered to drive all the way back (never mind re-pack it), so instead im a gonna do a little "modifying" of my own. I'll post up some pics when im done. I cant wait, haven't had my decks set up for ages!

Now.... where did I put that jigsaw?


P.S Nice to see you back Deflation, vinyl collection gets bigger and bigger!
 
beefy said:
P.S Nice to see you back Deflation, vinyl collection gets bigger and bigger!
Click to expand...

Yeah, I finally have time to get back to what I love best. I was reminiscing about the old guys on here the other day. I dont recgonize anyone anymore!
 
You must log in or register to reply here.
Back
Top