sampling cd's

  • Thread starter Thread starter Apollo Creed
  • Start date Start date
A

Apollo Creed

New member
im using an mpc2000xl...how would i go about sampling from a cd...what do i need???
 
You need a scsi CDrom Drive and a akai,Roland,Emu formated sample cd.

Do you Ebay?

There out there.

Look for SCSI CD drive.... and look for the older apple unit's you will save some money.
 
If I hook a scsi cd drive up to my s1000. Will it allow me to sample from I cd I put in it and also save and load to and from cd r/w's.
 
Or...you could go the cheaper route and sample from a cd player into the MPC using the rca's or 1/4 inch jacks.
( dont know which the MPC has )
 
But I was going to get one anyway if it would allow me to save and load from nomral. CD r's.
 
JunkOne said:
Or...you could go the cheaper route and sample from a cd player into the MPC using the rca's or 1/4 inch jacks.
( dont know which the MPC has )
Click to expand...
The problem sometimes is that sometimes the quality of the audio is bad
 
wouldnt it be top quality if its sampled from a cd ? cd's are already mastered and are in top condition. even the old stuff on cd is re-mastered to sound good. i dont get what your saying...
 
sampling audio from a cd player:

1. Do it digitally, (though you'd need the output expansion board for the mpc to do that)

2. If you have a pro cd-r machine with balanced outs ( the mpc has balanced 1/4 jack inputs)do it that way

3.If you have a DJ mixer with balanced out and a cd with normal phono outs plug it into the dj mixer then go balanced out into the mpc.

4. A cd-rom connected by scsi is the easiest way to load in data like wavs, snd files etc
 
You must log in or register to reply here.
Back
Top