Hello:
I have a unusual problem and I'm seeking guidance on resolving it.
Background: About 6 months ago I purchased a Windows 7 upgrade: to upgrade from Vista. I didn't realize at the time that the Windows 7 upgrade would not totally
replace Vista. In essence the upgrade software sets up a separate partition with Vista existing in one partition and Windows 7 in another partition. I have since set up my Cubase 6.5 and all my plug-ins on the Windows 7 partition without incident and everything runs well for my single songwriter setup, even though it is an older Core 2 processor.
My problem: For Xmas, I decided to purchase a Waves plug-in to use for mixing. I made the purchase and attempted to download the plug-in using the new Waves V9 installer. V9 downloads and installs correctly HOWEVER: and here it where it gets weird: the Waves License Center does not recognize the partition where Cubase
6.5 is installed (i.e. the Windows 7 partition on my H: Drive). Instead it only recognizes the partition where Vista is installed (C: Drive). The bottom line is that the Waves plugin cannot be activated because it does not recognize V9 where the Cubase and the Waves plug-in are installed.
Efforts to Date: I worked with Waves yesterday and after extensive attempts to get the Waves License Center to recognize the H: Drive (to no avail), we decided to
download the activation code to a USB drive. However, the problem there is that I still must use the Waves License Center to activate the plug-in and the Waves License Center is saying that it does not recognize the USB drive (same problem I started with. Waves doesn't recognize the H Drive as he HDD). What a dilemna.
Alternatives: As I see it, I have the following alternatives:
a. Wipe out 6 months of work, reformat everything, buy a single license of W7 and start over. (Ugghhh.)
b. Go back to Waves to see if there is any way that the USB Drive can be recognized by V9 on the H partition.
c.Try to get Cubase 6.5 to open on my C Drive with Vista as the operating system (don't know if this is feasible), and authorize the Waves plug-in from my C: Drive. Once authorized, my problem might be resolved. The problem with this approach is that Cubase relies on files in the H Drive Windows 32 sub-folder to execute. I am not an expert in this, and have serious reservations about copying and pasting files needed to start Cubase from the current H: partition to the C: partition without hearing from others who may be able to shed some light on the potential risks and benefits of this alternative.
d. Contacting Microsoft Windows 7 forum (DONE- no responses yet) to see if there is any way that the H: Drive can be recognized as the computer HD
instead of the C: Drive.
Any thoughts from “techies” on the forum would be appreciated and be a great Xmas present. Thanks.
I have a unusual problem and I'm seeking guidance on resolving it.
Background: About 6 months ago I purchased a Windows 7 upgrade: to upgrade from Vista. I didn't realize at the time that the Windows 7 upgrade would not totally
replace Vista. In essence the upgrade software sets up a separate partition with Vista existing in one partition and Windows 7 in another partition. I have since set up my Cubase 6.5 and all my plug-ins on the Windows 7 partition without incident and everything runs well for my single songwriter setup, even though it is an older Core 2 processor.
My problem: For Xmas, I decided to purchase a Waves plug-in to use for mixing. I made the purchase and attempted to download the plug-in using the new Waves V9 installer. V9 downloads and installs correctly HOWEVER: and here it where it gets weird: the Waves License Center does not recognize the partition where Cubase
6.5 is installed (i.e. the Windows 7 partition on my H: Drive). Instead it only recognizes the partition where Vista is installed (C: Drive). The bottom line is that the Waves plugin cannot be activated because it does not recognize V9 where the Cubase and the Waves plug-in are installed.
Efforts to Date: I worked with Waves yesterday and after extensive attempts to get the Waves License Center to recognize the H: Drive (to no avail), we decided to
download the activation code to a USB drive. However, the problem there is that I still must use the Waves License Center to activate the plug-in and the Waves License Center is saying that it does not recognize the USB drive (same problem I started with. Waves doesn't recognize the H Drive as he HDD). What a dilemna.
Alternatives: As I see it, I have the following alternatives:
a. Wipe out 6 months of work, reformat everything, buy a single license of W7 and start over. (Ugghhh.)
b. Go back to Waves to see if there is any way that the USB Drive can be recognized by V9 on the H partition.
c.Try to get Cubase 6.5 to open on my C Drive with Vista as the operating system (don't know if this is feasible), and authorize the Waves plug-in from my C: Drive. Once authorized, my problem might be resolved. The problem with this approach is that Cubase relies on files in the H Drive Windows 32 sub-folder to execute. I am not an expert in this, and have serious reservations about copying and pasting files needed to start Cubase from the current H: partition to the C: partition without hearing from others who may be able to shed some light on the potential risks and benefits of this alternative.
d. Contacting Microsoft Windows 7 forum (DONE- no responses yet) to see if there is any way that the H: Drive can be recognized as the computer HD
instead of the C: Drive.
Any thoughts from “techies” on the forum would be appreciated and be a great Xmas present. Thanks.
