Reason 5 Kong: Aux Send Outs

[MegaloDeez]

Im reading the manual and Im still a bit confused on exactly how to use the Aux Send Out in Kong.

So far I have Kong:Aux Send Out 1 to Delay: Input
I have the Delay: Output to Kongrum and Fx: Audio Input (Far Left)

This works fine with the Aux 1 Controls.

My question is how do Connect another effect like (Scream or RV7000) to Aux 2 controls?

 

[bandcoach]

Dude that won't cut it.

Why? Because the delay is going back in on a channel for a particular drum/pad.

The whole point of Aux sends is that they don't come back into the box but end up in the mix chain further downstream.

I have added two Fx to the Aux sends on the Kong in the Demo song and packaged it up in a zip file here.

Explore experiment and have fun.

 

[MegaloDeez]

Id like to send you what I have. My goal was to put a Mixer in the combi and route all my drum pads there without external routing. But the Redrum additions made it difficult.

How could I send you a zip or rns file? Tried to send it on the forum but it wont allow.

---------- Post added at 06:12 PM ---------- Previous post was at 06:10 PM ----------

Btw, thanks, that worked like a charm. But there are some things id like try still with Kong.