BeatZombies91
New member
During a recording session, I had to adjust the ASIO buffer size to make up for latency & delay in the mic input & also aggravating crackling static. The problem I'm having now is, after the session when I got back to beats, they would start to spazz out & crack. I hit the default "diamond" button for asio a dozen times, but am still Running into a wall. Is there a setting I need to eliminite the crackling/skipping? Thanks In Advance
@BeatZombie91
---------- Post added at 07:18 AM ---------- Previous post was at 07:14 AM ----------
Also, the CPU load is off the meter if that gives you more to work with as far as a diagnosis. Preciate y'all
@BeatZombie91
---------- Post added at 06:19 PM ---------- Previous post was at 07:18 AM ----------
Fixed. Thanks for all your help (syke)
@BeatZombie91
---------- Post added at 07:18 AM ---------- Previous post was at 07:14 AM ----------
Also, the CPU load is off the meter if that gives you more to work with as far as a diagnosis. Preciate y'all
@BeatZombie91
---------- Post added at 06:19 PM ---------- Previous post was at 07:18 AM ----------
Fixed. Thanks for all your help (syke)