best cartridge/ needles for a stanton straight arm

  • Thread starter Thread starter foerster
  • Start date Start date
F

foerster

you know me well
Ok I am new to DJ turntables.. I had been sampling on an old one until I got this Stanton Str8-80..
It was used.. but still works fine, the only problem is I think the stylus is worn out. It is the DJ craze cartidge.

Now I know that for straight arm turntables you can't use an eliptical cartridge.. I think.

So can anyone recommend a good sounding cartridge or needle (not sure what i have to replace) that will be good for sampling, using a straight arm turntable?
It is not necessary that it is good for scratching, mixing, or anything like that.


Thanks!!
 
........

For a nice sounding Dj style cart i think the Shure m35x, Stanton SA-890 or probably an Ortofon OM Nightclub S are the 'top' picks.
 
The Only problem w/ Shure 35 series, the cartridge does not like to be grounded. the Str8-80 has a self grounding cable so w/ any 35 cart u will get a hum
 
yurp

if u can afford it, i'd go with a m447, they really aren't that expensive, considering u'd be getting a really quality cart. and once u mount them corrected.. they stick to ur vinyl, especially with a straight tone arm
 
Thanks for the help...

I should have made it more clear: I am looking a reasonably priced cart that will sound good and fit a straight arm.
It is not necessary that the cart be good for mixing, scratching, back cueing, or anything dj related... Just for sampling
 
oh sorry, i didnt realize its just for sampling.. in that case u should look into a pickering cart. they are strictly for sound quality.. and they are reasonalbly priced.
 
LOL Pickering :) i got one for $5 and it's a crap version of the 500al. For sound quality go for something like a Grado DJ200. From what I've heard they have the best sound quality, far surpassing the sound quality of those shure whitelables. The only reason why they r not as popular for djing is b/c their skip resistance is not as good as most dj carts. But the sound is great and it has a low cue-burn. If you want a great reasonably priced "audiophile" cart only Grado's will do.

www.gradolabs.com
 
haha woops. i honestly hadn't ever tried a pickering, but i had heard they're an economical way to get sound quality carts
 
dj chex said:
LOL Pickering :) i got one for $5 and it's a crap version of the 500al. For sound quality go for something like a Grado DJ200. From what I've heard they have the best sound quality, far surpassing the sound quality of those shure whitelables. The only reason why they r not as popular for djing is b/c their skip resistance is not as good as most dj carts. But the sound is great and it has a low cue-burn. If you want a great reasonably priced "audiophile" cart only Grado's will do.

www.gradolabs.com
Click to expand...

That sounds like it might be right for my use..

Only question is, can you mount this kind on a straight arm turntable? Doesn't it have to be a special kind of cart so that it doesn't tear up the viynl??

As you can see I am new to this, I am used to using my pop's 1970's Technics Belt-Drive.

Thanks
 
old vintage techs, sweet!! With a straight arm table i would recomend staying away from ellipical stylus b/c it would be like a blunt diamond tip knife carving into your vinyl. Crap... the Grado i recomended earlier has a elliptical stylus. OK for another cart that may work but is not gonna sound nearly as good would be something like a stanton 680HP b/c it has a high output, sounds warm, low cue burn and has a spherical stylus. i think im going crazy now w/ all this talk bout needlz:victory:
 
Lngrunner said:
haha woops. i honestly hadn't ever tried a pickering, but i had heard they're an economical way to get sound quality carts
Click to expand...


Do you want one??? I have it sitting in my record bag as a spare in case my cheap 520sk's break. nice high output but sounds really distorted like it's gonna blow the speakers and cut a hole through my vinyl :bat:
 
i personally would stick with the 520sk (you can just by a replacement stylus, save even more money :)), I have them, and they definitely do not suck. The things about Stanton's turntables (the ones without tonearm height adjustments) is that they are designed for Stanton carts. If you use a Shure M44, its gonna sit wrong and wreck your record. Stick with the Stantons and you'll be ok. (not to sound too much like a corporate whore)
 
DJ Peligro said:
i personally would stick with the 520sk (you can just by a replacement stylus, save even more money :)), I have them, and they definitely do not suck. The things about Stanton's turntables (the ones without tonearm height adjustments) is that they are designed for Stanton carts. If you use a Shure M44, its gonna sit wrong and wreck your record. Stick with the Stantons and you'll be ok. (not to sound too much like a corporate whore)
Click to expand...

Cool, how much is a replacement stylus?
 
the 520sk is not bad. i got a couple for everyday use and they are extremely durable. The stylus cost $30 each or a 3 pack for $60. Each should be replaced in about a year or so. For sound quality however, i'm sticking w/ my recomendations.:cheers:
 
DJ Peligro said:
i personally would stick with the 520sk (you can just by a replacement stylus, save even more money :)), I have them, and they definitely do not suck. The things about Stanton's turntables (the ones without tonearm height adjustments) is that they are designed for Stanton carts. If you use a Shure M44, its gonna sit wrong and wreck your record. Stick with the Stantons and you'll be ok. (not to sound too much like a corporate whore)
Click to expand...

sorry that i wasn't clear but i wasn't dissing the 520sk i was more or less trying to diss a pickering nc-pk or something like that...
 
You must log in or register to reply here.
Back
Top