Anyone removed the jog wheel from a CDJ 1000 MK3 ?

[Sk1nZ]

Im needing to remove the jog wheel from one of my CDJ 1000 mk3's, ive searched all over and cant find anything on the mk3, there's a youtube video showing how to do it on the mk2 but it seems the mk3 has a added metal plate inside which may or may not be covering one of the screws needed to take the jog wheel off..

At 2:10 in this video you can see the mk2's insides

https://www.youtube.com/watch?v=1Tl_xkT19hY

And here's a couple pictures of whats inside the mk3...

If anyone knows how to remove the jog wheel it would be appreciated!

Thanks

 

[M3SS-E]

round the underneath of the jog all the way round the black ring there's screws u need to remove to free it from the case 2 are located just under the ribbon cables one on the left one on the right, carefully bend these out the way to remove the screws then the last one there's a whole in the circuit board above giving acces to one last screw remove that as well but be careful not to drop the screw inside. only other thing u need to do is pull off the jog tension adjust knob one the front of the player. then just carefully remove the whole wheel out of where it sits.