Ledger Note
We are Ledger Note
This is a kind of crazy story. At least 7 to 8 years ago, I found some old cubicle walls in the basement of an old factory job. I looked up the manufacturer and found that they used Owens Corning 703, which is THE rigid fiberglass to use for broadband absorbers. So I asked if I could have them and the boss was more than happy for me to "clean up the basement" for him.
I ended up building frames, choosing fabric, and building these all right before I moved to a new apartment. They ended up getting crammed in storage till about a month ago when I moved again and finally hung them. I can finally be loud without being inconsiderate of neighbors, so i'm back at it.
The cubicle walls... two of them had full pieces of 2-inch thick 703 while two others were comprised of cut pieces. I don't know if they were left overs but at least they were all uniform in size, which led to all of the small panels.
^ Look how flush the face of the fabric is to the frame! So proud
Continuing in second post...
I ended up building frames, choosing fabric, and building these all right before I moved to a new apartment. They ended up getting crammed in storage till about a month ago when I moved again and finally hung them. I can finally be loud without being inconsiderate of neighbors, so i'm back at it.
The cubicle walls... two of them had full pieces of 2-inch thick 703 while two others were comprised of cut pieces. I don't know if they were left overs but at least they were all uniform in size, which led to all of the small panels.
^ Look how flush the face of the fabric is to the frame! So proud
Continuing in second post...