Mpc question

[Chronos]

Hey,

I'm setting up a new program with some samples created in Peak and some wavs taken from a sample cd.

When I hold down a pad on the MPC, the sample loops. I don't want that --- I want to hold the pad and trigger the sample once so that the whole sample plays without repeating.

Anyone know how to do this? The manual has been lost for sometime.

Also, I believe that the wavs off the sample cd are the ones looping, while the samples created in Peak and then converted with iTunes do not loop.

This is strange, and I've never run across this before.

Lemme know if you can help!

Thanks,
Chronos

 

[Pase]

go to the trim screen f5 and turn looping off

 

[baggysound]

what mpc are you talking about?

60? 1000? 2000? 2000xl? 3000? 4000?

if it's a 2kxl or a 4k then you'll find the manual here: http://www.akaipro.com/us/omdload.html

 

[Chronos]

Pase-

Thanks. I'll try that out.



Baggy-

thanks for the link. I've got a 2000xl

-J

 

[baggysound]

Pase-

Thanks. I'll try that out.



Baggy-

thanks for the link. I've got a 2000xl

-J

you're welcome

i know it can be frustrating when losing a manual, but there's usually a way to get it in some way