Results 1 to 8 of 8

Thread: Only 1 Monitor Works!??

  1. #1
    Join Date
    Nov 2006
    Posts
    22
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Exclamation Only 1 Monitor Works!??

    Sign in to disable this ad
    How u doin...?

    I got a little problem..
    I got a mixer Phonic Helix Board USB 12.. And i tried to connect 2 KRK RP5 G2 to it... But bad luck, only one monitor work.. But i putted the cables in the Main Left & Right... the right only works... when i chance the cables, the left works only...what im doin wrong? And the mixer & cables are working 100%...

    please help somebody!!!

    :confused:

  2. #2
    Join Date
    Jun 2006
    Location
    London (South East)
    Posts
    19,072
    Thanks
    0
    Thanked 6 Times in 6 Posts
    Maybe your output is mono?

  3. #3
    Join Date
    Nov 2006
    Posts
    22
    Thanks
    0
    Thanked 0 Times in 0 Posts
    how do i get that right?

  4. #4
    Join Date
    Jun 2006
    Location
    London (South East)
    Posts
    19,072
    Thanks
    0
    Thanked 6 Times in 6 Posts
    Your manual will tell you if its mono. If it is mono your probably hooking your monitors up to the wrong output.
    Last edited by noblewordz; 09-02-2008 at 07:02 AM.

  5. #5
    Join Date
    Nov 2006
    Posts
    22
    Thanks
    0
    Thanked 0 Times in 0 Posts
    any idea in what channel i have to put the cables?

    tnx

  6. #6
    Join Date
    Jun 2006
    Location
    London (South East)
    Posts
    19,072
    Thanks
    0
    Thanked 6 Times in 6 Posts
    On the back where it says "main".

  7. #7
    Join Date
    Dec 2002
    Posts
    5,245
    Thanks
    0
    Thanked 21 Times in 14 Posts
    Most likely has nothing to do with mono... If it were mono, then both speakers would output the same signal rather than one shutting off.

    If when you say you switched the cables, you mean:

    Unplugged them from the mixer while leaving them connected to the monitors and switched where you plugged them into the mixer-- then you have a bad monitor.

    If by switching cables, you mean you completely switched the cables from left mixer output and left monitor to right mixer output and right monitor-- then you have a bad cable.

    If you mean you switched re cables at the monitor end only-- you have a bad mixer output.


    (just think through the signal flow logically)

  8. #8
    Join Date
    Mar 2008
    Posts
    3,433
    Thanks
    4
    Thanked 1 Time in 1 Post
    Quote Originally Posted by dvyce
    Most likely has nothing to do with mono... If it were mono, then both speakers would output the same signal rather than one shutting off.

    If when you say you switched the cables, you mean:

    Unplugged them from the mixer while leaving them connected to the monitors and switched where you plugged them into the mixer-- then you have a bad monitor.

    If by switching cables, you mean you completely switched the cables from left mixer output and left monitor to right mixer output and right monitor-- then you have a bad cable.

    If you mean you switched re cables at the monitor end only-- you have a bad mixer output.


    (just think through the signal flow logically)
    ahhh, the fine art of troubleshooting.
    Trust me, I know what I'm talkin bout! check my history:
    https://www.futureproducers.com/forum...duser&u=104214

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •