Results 1 to 3 of 3

Thread: Help with XLR wallplate hookup

  1. #1
    Join Date
    Feb 2004
    Posts
    7
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Help with XLR wallplate hookup

    Sign in to disable this ad
    I cut a couple of holes in my closet wall to install XLR and 1/4" jacks (amature vocal booth attempt). But I really dont know WTF im doing.....I have to solder the three wires (+,- & ground) into either side (female to male). I tried once already with the 1/4" but I only got sound out of the right side of the headphones when i plugged em in. I just need to know exactly how to solder these things together. PLEASE HELP. Thanx

  2. #2
    Join Date
    Sep 2003
    Posts
    123
    Thanks
    0
    Thanked 0 Times in 0 Posts
    atleast you got sound from it! i dunno man isn't it only mono in the first place?

  3. #3
    Join Date
    Mar 2002
    Posts
    23
    Thanks
    0
    Thanked 0 Times in 0 Posts
    What are the connections for? It sounds like a mic and a headphone? Like cryptide asked, are you sending a stereo signal through the headphones?

    If you want a pass-through connection, you should just connect pin to pin between the two jacks. Just make sure that the wires connecting the top two pins of the XLR cross-over (so pin 1 on the F jack connects to pin 1 of the M jack).

    HTH

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •