Anyone using Room EQ Wizard?

cR8!

New member
Basically, I need someone to compare my measurements to. As much as I've read about how bass builds up in small rooms, I figured the lower frequencies of my measurements would be well above the mids and highs (or maybe I don't understand what happens when low frequencies collide with each other), and yet, 200 to 2000 hz seems to be higher than the rest. Also, I'm not confident in interpreting the results.

Are these the results one would expect given the size of the room?


This is how the room is laid out. The narrow line in the wall on the right side of the image is the window. The monitors are JBL 305s and I'm not using a subwoofer.


Room Set-up.jpg





And here are the graphs. I used a Dayton Audio EMM-6 plugged into a Focusrite Scarlett 18i20, hooked to the aux connection of my PreSonus Monitor Station v2, which runs into the monitors.


Measurement 1 Waterfall.jpgMeasurement 1.jpg
 
Back
Top