~X~
Word+Sound+Power= Music
Leave your master fader at unity gain which is 0dbfs. Also never put any other faders higher than the master fader.
Volume level while recording vocals
- Thread starter flit
- Start date
Leave your master fader at unity gain which is 0dbfs. Also never put any other faders higher than the master fader.
~X~, sorry for my bad English, I was not referring to the master channel, I meant that when I am gain staging, and I configured the VU meter to -18db VU, and made sure that the signal doesn't peak above 0dbVU, should the fader of that channel [vocal] in my DAW also be set to -18dbFS while I am recording or should I leave it to 0dbFS?
---------- Post added at 04:11 PM ---------- Previous post was at 04:10 PM ----------
Sorry this question was already answered.
---------- Post added at 04:11 PM ---------- Previous post was at 04:10 PM ----------
Sorry this question was already answered.
Last edited:
CrunkNationEnt
All Killa, No Filla!
FP's!
Thank you all very much for sharing your input, it is helping me out tremendously!
I want to share an article that i dug up that shares the same sentiment as many of the replies to this thread.
Proper Audio Recording Levels | Rants, Articles
Very good read for further understanding, thanks again!
TAZ
Thank you all very much for sharing your input, it is helping me out tremendously!
I want to share an article that i dug up that shares the same sentiment as many of the replies to this thread.
Proper Audio Recording Levels | Rants, Articles
Very good read for further understanding, thanks again!
TAZ