Results 1 to 6 of 6

Thread: Need help with my kicks and snare peaks in my mixes

  1. #1
    Join Date
    Jul 2019
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Need help with my kicks and snare peaks in my mixes

    Sign in to disable this ad
    This particular issue has been bugging me for awhile and I still haven't figured it out. I'm no mixing/mastering wiz by any means. I am wanting to post some beats that I have online and I want the volume to be comparable to other beats on the particular site I'm using. My kick and snare peaks are so much higher than everything else in my mixes, it's making it hard to master a preview for the site that is loud enough without sacrificing certain frequencies. I've been using a limiter on my kicks and snares but it's not quite having the effect I was desiring. I'll post a few pics and mp3s for reference. Using Logic Pro btw. Please, any suggestions would be great. Thanks
    Attached Thumbnails Attached Thumbnails screen-shot-2019-07-28-9-07-55-am-jpg   screen-shot-2019-07-28-9-07-32-am-jpg  
    Attached Files Attached Files

  2. #2
    Join Date
    Mar 2013
    Location
    Sofia, BG
    Posts
    54
    Thanks
    0
    Thanked 3 Times in 3 Posts

  3. #3
    Join Date
    Jul 2019
    Posts
    8
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Then working with audio there are a few important things to note
    First Clip volume(Volume of the audio clip or.wav or mp3/whatever else)
    This is the first and most important place for the gain of your sound. You always want to make sure that you turn your audio clips down to a reasonable level before going into your mixer.

    When a sound is in your mixer, (channel gain) its pulling the info from the audio clip and then adding whatever you have on the mixer.

    So what Im getting at is that you need to make sure your kicks and snares/claps are not having super loud peaks before putting them into your mixer.

    This is part of a process called "gain staging"
    After you pull the levels of the samples down, you can throw them into your mixer and add a solid compression and come out with something that sounds much closer to what you're listening to on those sites

    Hope this helps

    Edit: After listening to the mp3's you sent, those kicks and snares are just too loud. try turning them down in your mixer
    Last edited by iHipsterMusic; 07-28-2019 at 11:43 AM.

  4. #4
    Join Date
    Oct 2015
    Location
    NYC
    Posts
    75
    Thanks
    14
    Thanked 6 Times in 6 Posts
    lower frequencies will always peak louder than high frequencies

    try bringing up or limiting the other elements in your mix & see if that helps balance things out more.

    don't clip of course in the process

  5. #5
    Join Date
    Sep 2019
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Yeah in my opinion the kicks and snares are just to loud. Maybe sidechain them a bit more and turn down their volume. That way you will hear them clearly and not mess up any frequencies.

  6. #6
    Join Date
    Aug 2009
    Location
    Los Angeles, CA
    Posts
    1,288
    Thanks
    0
    Thanked 66 Times in 46 Posts
    Dcour,

    I listened (sounds good) and looked at the waveforms. You just need a limiter/clipper on this. You can stick it directly on your mixbuss as the very last insert, post-fader, or you can bounce the mix so you have an non-limited version (very good idea to do) and then re-import it and just apply the limiter/clipper and bounce that for the master level mix. It’s always a good idea to have both a master level mix and the unadulterated mix. You could also just do a mix like you have (as a 24bit wav file though, obviously), and then do a second mixdown with the limiter/clipper on it (also as a 24bit wav file - you can then make a separate mp3).

    Basically, what you have is the normal mixdown. This is like what a mix engineer would send to a mastering engineer (if it had vocals). What you need is a mastered version, or just a master “volume” version that’s as loud as a mastered record. We usually technically call this a “master level” mix. Meaning it’s the mixdown, just turned up to a mastered level with a limiter or clipper. When you "shop" your beats, you want to shop the master level mix. The artist or engineer working with them will later ask for the multitracks (although, mixtape stuff, they might just ask for the non-master level mix.... or they might not!).

    For a free version, I would recommend Limiter No. 6 by Vladg/sound. Just use either the limiter or the clipper. Experiment with both and see which you prefer. I usually use a clipper with a 4 or 6dB knee. There are many others out there that might be simpler if Limiter No. 6 seems overly complicated and your DAW probably has a built-in one that might be okay (or it might suck).

    P.S. - I would not follow the advice of the previous posters. Nothing against them, I just don't think it's appropriate advice for the problem you are having.
    Chris 'Von Pimpenstein' Carter - Major label mixer/producer
    http://www.vonpimpenstein.com

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •