ObiK
IK Multimedia
iRig HD & iRig PRO now compatible with Windows
[h=4]Workaround is compatible with Windows XP, Windows Vista, Windows 7, and Windows 8[/h]
To get iRig HD and/or iRig PRO working on Windows you need to download a 3rd party driver called ASIO4ALL. Although it is a 3rd party driver, we have tested it in several Windows configurations with good results. This 3rd party driver allows you to select different input and output sources, which is needed since iRig PRO does not offer an output.
Please follow these steps to setup your device on Windows. Please note that there are interfaces that may not work properly with the below steps:
1. Download ASIO4ALL v2 here: ASIO4ALL - Universal ASIO Driver
2. Install ASIO4ALL.exe
3. Launch AmpliTube 3 or your DAW
4. In AmpliTube 3, click on Settings > Audio/MID Setup. Select ASIO driver, then choose ASIO4ALL v.2 driver as the Input device.
5. Click to view the 'Panel'
6. You are now viewing the ASIO4ALL Panel, click the 'wrench' icon in lower right corner, a red 'X" will appear over it. This is necessary for you to select multiple interfaces for use. You will see various devices listed under the WDM Device List.
Click the enable/power button on both the iRig PRO and your other interface that you will be listening to the output from. See image.
7. Once the above is set, view your AmpliTube 3 Settings > Audio/MIDI Settings window once again. Under Input channels, you can now view and select iRig PRO as your input.
Under Output channels, make sure your interface you are monitoring from is selected.
Note: Do NOT enable the 'Hardware Buffer' under Options in the ASIO4ALL panel, as this causes poor performance.
You are now ready to play!
For more info on the iRig HD specs click here
For more info on the iRig PRO specs click here
[h=4]Workaround is compatible with Windows XP, Windows Vista, Windows 7, and Windows 8[/h]
To get iRig HD and/or iRig PRO working on Windows you need to download a 3rd party driver called ASIO4ALL. Although it is a 3rd party driver, we have tested it in several Windows configurations with good results. This 3rd party driver allows you to select different input and output sources, which is needed since iRig PRO does not offer an output.
Please follow these steps to setup your device on Windows. Please note that there are interfaces that may not work properly with the below steps:
1. Download ASIO4ALL v2 here: ASIO4ALL - Universal ASIO Driver
2. Install ASIO4ALL.exe
3. Launch AmpliTube 3 or your DAW
4. In AmpliTube 3, click on Settings > Audio/MID Setup. Select ASIO driver, then choose ASIO4ALL v.2 driver as the Input device.
5. Click to view the 'Panel'
6. You are now viewing the ASIO4ALL Panel, click the 'wrench' icon in lower right corner, a red 'X" will appear over it. This is necessary for you to select multiple interfaces for use. You will see various devices listed under the WDM Device List.
Click the enable/power button on both the iRig PRO and your other interface that you will be listening to the output from. See image.
7. Once the above is set, view your AmpliTube 3 Settings > Audio/MIDI Settings window once again. Under Input channels, you can now view and select iRig PRO as your input.
Under Output channels, make sure your interface you are monitoring from is selected.
Note: Do NOT enable the 'Hardware Buffer' under Options in the ASIO4ALL panel, as this causes poor performance.
You are now ready to play!
For more info on the iRig HD specs click here
For more info on the iRig PRO specs click here