Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: midi setup

  1. #1
    Join Date
    Jan 2014
    Location
    ◾facebook.com/
    Posts
    39
    Thanks
    0
    Thanked 1 Time in 1 Post

    midi setup

    Sign in to disable this ad
    Hey I need some help asap, I have an old concertmate 980 (casio ctk-511) keyboard with midi in and out on back but how the heck do I get ableton to pick it up if that's possible, im using it alongside an akai mpk25 I would ideally like to record from both if that's possible, im using a usb to midi adapter converter interface.

    Help

  2. #2
    Join Date
    Feb 2003
    Location
    helsinki, finland
    Posts
    19,946
    Thanks
    7
    Thanked 339 Times in 311 Posts
    Should be well possible. Have you tried connecting the MPK to the MIDI/USB interface via a MIDI cable, just to see that your MIDI interface works? Easy enough way to start troubleshooting.

    Basically there shouldn't really be any extra steps to take. There aren't many MIDI settings on the keyboard; you might wanna check on which MIDI channel the Concertmate is sending on - I think Live defaults on receving on all channels, so theoretically it shouldn't really matter at this point.

  3. #3
    Join Date
    Jan 2014
    Location
    ◾facebook.com/
    Posts
    39
    Thanks
    0
    Thanked 1 Time in 1 Post
    Hey thanks for the reply, im just bit fed up with not having it all up and running, basically all I want is to have both keyboards working in ableton if possible and also the volca bass involved somewhere in between

  4. #4
    Join Date
    Feb 2003
    Location
    helsinki, finland
    Posts
    19,946
    Thanks
    7
    Thanked 339 Times in 311 Posts
    Well, as said there's nothing there that's impossible. You just have to troubleshoot the setup somehow and since you have two MIDI-capable keyboards and one interface, that's a good place to start.

  5. #5
    Join Date
    Jan 2014
    Location
    ◾facebook.com/
    Posts
    39
    Thanks
    0
    Thanked 1 Time in 1 Post
    Thanks again I think im in too much of a rush, plus something else the akai mpk25 shows up in ableton preferences but the concertmate keyboard doesn't, any ideas

  6. #6
    Join Date
    May 2013
    Location
    UK
    Posts
    1,054
    Thanks
    84
    Thanked 99 Times in 89 Posts
    It won't see the keyboard but it will see the MIDI signals sent out from it... I don't know Ableton but best guess is that there's an "add controller" in the audio/midi-settings menu where you can tell the DAW what is creating the signal...
    I'm all about that boombap.

  7. #7
    Join Date
    Feb 2003
    Location
    helsinki, finland
    Posts
    19,946
    Thanks
    7
    Thanked 339 Times in 311 Posts
    Yeah, the Concertmate won't show up as such - the MIDI/USB interface should, as (extra) MIDI ports in the MIDI preferences. You basically just have to make sure at least "track" is on for that MIDI port (there shouldn't be any others if that cable is your only interface).

  8. #8
    Join Date
    Jan 2014
    Location
    ◾facebook.com/
    Posts
    39
    Thanks
    0
    Thanked 1 Time in 1 Post
    Hey got the concertmate connected via the midi to usb cable and not getting anything going into ableton, the keyboard is set to channel 1 itself so do I need to enable a track or midi in ableton to see the incoming midi from the concertmate, the akai has picked up straight away and working fine its just trying to get the concertmate up and running which is proving a little more difficult.

    thanks guys

  9. #9
    Join Date
    Feb 2003
    Location
    helsinki, finland
    Posts
    19,946
    Thanks
    7
    Thanked 339 Times in 311 Posts
    So you can see the MIDI to USB cable in Live's MIDI preferences? There's an incoming MIDi input activity "light" in the top corner (I can't remember if its left or right - it was right before but might've changed with L9), which should be blinking if you're getting MIDI from the Concertmate into Live. Don't worry about the channel before you get it at least to that point.

  10. #10
    Join Date
    Jan 2014
    Location
    ◾facebook.com/
    Posts
    39
    Thanks
    0
    Thanked 1 Time in 1 Post
    Hey guys ive just been up and tried a couple of things and its finally working ive got both akai and concertmate running, im using the concertmate as master as its 61 keys full size, and using the akai for well what ever I can really, the both working independently, im so happy its finally working I was beginning to think I needed a more up to date master keyboard or something( im not 100% ) when it comes to midi.

    anyway 1 more thing can I add the volca bass somewhere in between the above setup, all I have for the volca at the moment is a 3.5mm audio cable so any advise on this I will appreciate guys.

    Thanks for your time

    Phil

  11. The Following User Says Thank You to phil40 For This Useful Post:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •