Tight bass lines

willybeeman

willybeeman

New member
ive been using a sine bass ran through a compressor at 2:1 fast attack and release but when i mix the joint down the bass is still kinda all over the place and im failing to get a distingushable bass line melody that sits well with my song.. so basically i was wondering what everyones process is for making bass lines, what bass you usually go to first, and what compression ratios you guys are using....also any tips for coming up with bass line melodys would be helpful
 
mono? why? and if i want to compress say a subtacktor bass patch the output is mono so i only get sound out of the left or right speaker when i pass it through a compressor...thats why ive been using the malstrom for bass lines
 
If you want it tight keep it mono.It will still use both channels(R+L)
 
breal said:
If you want it tight keep it mono.It will still use both channels(R+L)
Click to expand...

yeah but the problem im having is when i run the mono output throught the compressor and route it to my mixer i only get sound from one speaker. thanks for the response /help btw i didnt expect anyone to give any help, most people just give smart ass remarks
 
check ur room acoustics also. Corners in ur room can exaggerate bass problems.
 
You must log in or register to reply here.
Back
Top