Changing the pitch of a bass to match the sample pitch

G

Givenalight

New member
Hey everyone,

I raised the pitch of my samples on the Kong, but then realized the notes of my bass don't match with the key anymore. I tried raising the pitch of the bass, but it can't seem to match the sample. Did anyone ever have this problem before?
 
If its almost there but you can't quite find the right notes you might need to fine tune the bass patch. Are you using the NNXT or something for the bass?

---------- Post added at 03:28 PM ---------- Previous post was at 03:26 PM ----------

If you're using a sampled bass in kong, you really need to assign the pitch on that to a fader or knob on your controller, the mouse is not accurate enough.
 
The bass I'm using is in the combinator.

---------- Post added at 08:06 PM ---------- Previous post was at 08:05 PM ----------

Like the pitch value on the kong is 26 if that makes any difference...
 
Use a malstrom or subtractor instead. Fine tune the sound using cents. It also helps if you understand how to sculpt a bass sound.
 
You must log in or register to reply here.
Back
Top