Please help with vocals!!

[yaboiphe]

here is one of my lead vocals...can someone please tell me how i should go about processing them because i cant figure it out for the life of me...Thanks in advance!!


send space.***/file/gcdxoz

[hackenslash]

Linky no workee.

In any event, this is a question that only you can answer. It depends too much on what you're after. For my vocals, I rarely if ever use any processing at all, apart from a tiny bit of reverb. These are artistic decisions that can't be answered for you, or at least not without a great deal more detail about what it is you want to achieve in sonic terms.

Best bet is to read up on what different kinds of processing will do to your recordings and go from there. There are some reasonable articles on Wikipedia concerning dynamics processing, the effects of different types of reverb, etc. Learn about what the effects do, and then you'll have more idea of how to apply them to your recordings with informed choices pertaining to your target results.

Good luck.

[Disasster]

send space.***/file/gcdxoz

take out the space between "send" and "space" and replace the *** with com, then it'll work

[DaGSpotSoldier]

Try:
Roll of(cut) low end with highpass filter up to between 60-90Hz for lead.
60-300Hz for background.

Hi-shelf boost starting around/between 11KHz and 16KHz.
Don't add too much. Balance Hi-freq. content with other instruments.
Don't make a "Overly" bright vocal, compared to instrumental.

Compression Ratio 2:1-4:1
Attack 1-5ms
Release 100ms
Depending on ratio and dyanamics 3-9dB reduction

This is just an Idea.
So many variables, techniques.
Good luck