I want to be able to record myself while I spin, basicly make CDs. My plan is to somehow record from my DJM-300 or receiver to my computer and then burn it to my CDR. Do I need some special type of sound card for my computer to do this? Or do I need a dif Mixer, I know the DJM-600 has a Record Line out and the 300 & 500 dont. Please let me know. Thanks!
Recording? What do I need?
- Thread starter WeST
- Start date
mmhhh.. this is the "everyday chat" forum man.. you have another thread in "recording" already.
look:
http://www.onlinedj.com/board/showthread.php?threadid=4510
thanks for making sure you post in the right forum
moving this to "recording" again
look:
http://www.onlinedj.com/board/showthread.php?threadid=4510
thanks for making sure you post in the right forum
moving this to "recording" again
U
ukcoolat
Guest
any mixer can do it - and any sound card can do it.
Just connect the output of your mixer to the LINE INPUT of the computer (NOT THE MIC INPUT!) - (wether that be the master output or record output). Then record the result on some audio recording software. if you have none - try http://www.hitsquad.com/smm
If you only have one output on your mixer - then connect the computer LINE OUT to your amp so you can hear what you're doing!
Just connect the output of your mixer to the LINE INPUT of the computer (NOT THE MIC INPUT!) - (wether that be the master output or record output). Then record the result on some audio recording software. if you have none - try http://www.hitsquad.com/smm
If you only have one output on your mixer - then connect the computer LINE OUT to your amp so you can hear what you're doing!