AAMS Auto Audio Mastering System V3

[Denis van der Velde]

curioza.com

Welcome to AAMS, the introduction towards Automatic Audio Mastering!

As a musician or engineer working on music, you need the best sound possible when releasing material to the public. To audio master a mix towards a professional commercial quality recording and to create a sound for all audio speaker systems is a difficult and time consuming task.

This is where AAMS steps in and takes control!

AAMS is windows freeware for Audio Mastering. Featuring 100 Band Equalizer, 8 Multiband Compression, Balancing and Loudness settings for internal DSP Processing with all audio corrections automaticly done purely inside the AAMS Program. Also AAMS installs a Reference Database of 200+ Musical styles. Making the mastering process easy and less time consuming, having a good overall commercial sound quality, to process your Mix to a commercial great sounding Master.

Now you can listen to what you expect!

 

[marcelvandoorn]

AAMS Auto Audio Mastering System V3 - Version RevisionsAAMS 3.1 - Rev 006 (to be released on 18 September 2016!)- Reference Database added Brazil, Updated.
- Website AAMS V3 Manual, Added.
- Load Button added in Reference Centre Adjust, Added.
- Load Button added in Reference Left Adjust, Added.
- Load Button added in Reference Right Adjust, Added.
- Save Button added in Reference Centre Adjust, Added.
- Save Button added in Reference Left Adjust, Added.
- Save Button added in Reference Right Adjust, Added.
- Play Button added in Analyzer Spectrum Display, Added.
- Stop Button added in Analyzer Spectrum Display, Added.
- Forward Button added in Analyzer Spectrum Display, Added.
- Rewind Button added in Analyzer Spectrum Display, Added.
- Pauze Button added in Analyzer Spectrum Display, Added.
- Timescroller added in Analyzer Spectrum Display, Added.
- Playtime added in Analyzer Spectrum Display, Added.
- Load Reference Button added in Analyzer Spectrum Display, Added.
- Save Reference Button added in Analyzer Spectrum Display, Added.
- Peak L and R added in Analyzer Spectrum Display, Added.
- Peak Hold L and R added in Analyzer Spectrum Display, Added.
- Peak Level added in Analyzer Spectrum Display, Added.
- Options, Analyzer Spectrum (Show original x-axxis), Added.
- Analyzer Spectrum, Source Left Low and Left High, Added.
- Analyzer Spectrum, Source Right Low and Left High, Added.
- Analyzer Spectrum, Reference Left Low and Left High, Added.
- Analyzer Spectrum, Reference Right Low and Left High, Added.
- Analyzer Spectrum, Reference Mono Corrections, Added.
- Analyzer Spectrum, Reference Mono Corrections Undo, Added.
- Analyzer Spectrum Properties, Source, Reference (Automatic), Added.
- Analyzer Spectrum, Automatic Source vs Reference Setup, Added.
- Analyzer Spectrum, EQ Corrections Level Left, Added.
- Analyzer Spectrum, EQ Corrections Level Right, Added.
- Analyzer Spectrum, EQ Corrections Level Mono, Added.
- Analyzer Spectrum, Chart Deviation, Repaired.
- Options, DSP-EQ, EQ Level Corrections, Added.
- DSP-EQ, EQ Level Corrections for all Weighted EQ Bands Levels, Added.
- DSP-EQ, Connected Broken Level Metering L/R, Fixed.
- Analyzer, Loudness, ISO 226 Equal Loudness Curves Chart, Added.
- Analyzer, Loudness, AAMS Equal Loudness Conversion Chart, Added.
- Changed All Charts Background Color to Black, Added.
- Changed Options DSP-EQ, Appy Low Cutoff Filters (4x), Added.
- Changed Analyzer Suggestion, Centre Adjust, Button RST to Reset, Added.
- Changed Analyzer Suggestion, Left Adjust, Button RST to Reset, Added.
- Changed Analyzer Suggestion, Right Adjust, Button RST to Reset, Added.
- Changed Analyzer Suggestion, Centre Adjust, Button CLR to Clear, Added.
- Changed Analyzer Suggestion, Left Adjust, Button CLR to Clear, Added.
- Changed Analyzer Suggestion, Right Adjust, Button CLR to Clear, Added.
- Changed Analyzer Suggestion, Centre Adjust, Colors to Gray, Added.
- Changed Analyzer Suggestion, Left Adjust, Colors to Yellow, Added.
- Changed Analyzer Suggestion, Right Adjust, Colors to Green, Added.
- Changed DSP-EQ, Centre Adjust, Button RST to Reset, Added.
- Changed DSP-EQ, Left Adjust, Button RST to Reset, Added.
- Changed DSP-EQ, Right Adjust, Button RST to Reset, Added.
- Changed DSP-EQ, Centre Adjust, Button CLR to Clear, Added.
- Changed DSP-EQ, Left Adjust, Button CLR to Clear, Added.
- Changed DSP-EQ, Right Adjust, Button CLR to Clear, Added.
- Changed DSP-EQ, Centre Adjust, Colors to Gray, Added.
- Changed DSP-EQ, Left Adjust, Colors to Yellow, Added.
- Changed DSP-EQ, Right Adjust, Colors to Green, Added.
- Changed Options, Appy Low Cutoff Filter (< 25 Hz), Added.
- Changed Options, Appy Low Cutoff Filter (< 20 Hz), Added.
- Changed Options, Appy Low Cutoff Filter (< 15 Hz), Added.
- Changed Options, Appy Low Cutoff Filter (< 10 Hz), Added.
- Changed DSP-Compressor, Behavior Multiband, Changed.
- Changed DSP-Compressor, Hunting 1-8 Multiband, Changed.
- Changed DSP-Compressor, Attack Time, Changed.
- Changed DSP-Compressor, Charts 1-8, Hunting Correct Left Led, Changed.
- Changed DSP-Compressor, Charts 1-8, Hunting Correct Right Led, Changed.
- Changed DSP-Compressor, Charts 1-8, AGC Save Level Left Led, Changed.
- Changed DSP-Compressor, Charts 1-8, AGC Save Level Right Led, Changed.
- Changed DSP-Compressor, ACC Data to AGC Data, Changed.
- DSP-Compressor, Connected Broken Level Metering L/R, Fixed.
- Added, DSP-Compressor, Tab DSP-Compressor AGC Controller, Added.
- Added, Suggestion Calculation Led at below status bar, Added.
- Added, Charts Update Led at below status bar, Added.
- Changed, About, Sined Studio Logo to 2016, Added.
- Changed, DSP-Compressor, Settings Default, Added.
- Changed, New Tab, License, Added.
- DSP-Loudness, Combined RMS, Peak and Brickwall, Changed.
- DSP-Loudness, Connected Broken Level Metering L/R, Fixed.
- DSP-Loudness, Balancing, Corrected Loud Clipping Levels, Fixed.
- DSP-Loudness, Chart RMS, Peak, Brickwall lines, Added.
- DSP-Loudness, Brickwall Limiter, Repaired Mono Th, Fixed.
- DSP-Loudness, Brickwall Limiter, Visualized Chart, Added.
- DSP-Loudness, Brickwall Limiter, Visualized Gauges, Added.
- DSP-Loudness, Brickwall Limiter, Deleted Unessecary, Added.
- DSP-Loudness, Tube Compressor, Tab, Added.
- DSP-Loudness, Tube Compressor, Gauges Left and Right, Added.
- DSP-Loudness, Tube Compressor, Chart Left and Right, Added.
- License Tab,Contact Form, Button, Added.
- License Tab, Keycode Instructions, Button, Added
- License Tab, Terms of Service, Button, Added.
- License Tab, Registration Button, Added Registration Instructions, Added.
- License Tab, Added Instructions to Register AAMS, Added.
- License Tab, AAMS Check for Updates Button, Added.
- About Tab, Basic Mixing, Link Changed to Website, Changed.
- About Tab, First Steps, Added Link to Website Introduction, Added.
- About Tab, First Steps, Added Link to Audio Examples, Added.
- About Tab, Version History, Added Link to Website Version History, Added.
- About Tab, User Recommendations, Added Link to Website User Recommendations, Added.
- About Tab, Reference Database, Added Link to Website Reference Style Database, Added.
- About Tab, AAMS and Windows, Added Link to Website AAMS and Windows, Added.
- About Tab, Basic Mixing Explained, Added Link to Website Basic Mxing, Added.
- About Tab, Basic Mixing Explained, Added Link to Website Mastering Explained, Added.
- About Tab, First Steps, Rearranged and added Buttons to Website, Added.
- Options Tab, Audio Mastering, Save Mastering File with Reference Filename, Changed.
- Options Tab, Audio Mastering, Save Mastering Document after Mastering, Fixed.
- Options Tab, DSP-Loudness, Chart Show Loudnes Left Right and Mono Lines, Added.
- AAMS Keycode License Checking Changed Behavior, Fixed.
- Audio Mastering, Removed '_Source' from Mastered Filename, Changed.
- Mastering Document, Pre Gain Amount, Added.
- Mastering Document, Starttime of Mastering, Added.
- Mastering Document, Endtime of Mastering, Added.
- Mastering Document, Durationtime of Mastering, Added.
- Mastering Document, Advertation and Terms, Added.
- Mastering Document, Cleaned Up, Added.
- Menu, Print Current Page, ALT+CTRL+P,Added.
- Menu, AAMS, Changed to AAMS Menu, Changed.
- Menu, Screenshot to Desktop, ALT+CTRL+S, Added.
- Menu, License and Registration, Added.
- Menu, Check for Updates / Download and Start Setup, Added.
- Menu About, Download Setup to Desktop, Added.
- Licence Tab, Download Setup to Desktop, Added.
- Licence Tab, Registration, Added Paypal.Me Account, Added.
- License Tab, Repaired Failing Keycodes, Fixed.
- Limited Freeware, Max. Platime is now 4 Minutes, Changed.
- Starup, Internet Connection is Checked, Added.
- Options, Button Internet Connection is Checked for Online, Added.
- Options, Button Check for AAMS Updates, Added.
- Options, EQ Level Corrections turned On, Fixed.
- Form, Background colors changed to lighter, Changed.
- Audio Tools, Button Play Audio File, Added.
- Audio Tools, Button Restart Audio File, Added.
- Audio Tools, Button Stop Audio File, Added.
- Audio Tools, Added Mediaplayer, Added.
- Options, DSP-EQ, Equal Loudness Curves ISO226 is turned Off, Changed.
- Options, Convert AAMS Mastered Audio File to MP3, Changed.
- Options, DSP-EQ, ISO226 Fletcher Munson EQ Corrections, Added.
- Suggestions, Fixed Floating Point Error, Fixed.
- Reference Database, EDM, Added.
- Reference Database, Updated, Changed.
- Reference Database, Rewritten, Changed.
- Load Options, At Startup, Error Behavior, Fixed.
- DSP-Loudness, Maximal Loudness Mastering 2 (-0.3 dB, -0.14 dB, -0.02 dB), Changed.
- Options, Power Factor from ISO226 Equal Loudness Curves, Added.
- License, aamslicense.ina file can be used to maintain license after updating, Added.
- Repaired Visualisation Modules, Fixed.
- Windows All Versions Compatible, for drives D: E: and F:, added.
- Windows 10 Compatible, changed behavior, fixed.
- Windows All Versions, Registration System, Fixed.
- AAMS Installer, Updated, Added.
- AAMS Installer, Splash Screen and Audio, Added.
- DSP-Compressor, Record Uncorrect Slowdown 5 Secs, Added.
- License Tab, Updated License Registration Information, Changed.
- License Tab, Button to Import an aamslicense.lic file, Added.
- License Tab, Button (4) will ask input Registration, Added.
- Menu, License Registration Input, Added.
- License Tab, Button to Unregister (now recommended), Added.