My new Video Editing/Recording Beast Machine

[DaGSpotSoldier]

I have a beast computer for audio recording, but this one is specifically being built
for video editing, and recording gameplay using an Elgato HD60 Capture card, as well as Streaming
gameplay from PS4/PC.
Gonna have a Triple Monitor setup. One for the audio computer, two for the video editing computer.

Got all the parts, putting it together.
Will post pics when done. Will be overclocked slightly(reason for the K motherboard)
Will be adding fan controller software and hardware.

Case: CFI Boreallight w/ USB 3.0, EZ Swap HDD, 2x 120mm & 1x 140mm fans, Side Panel Window

Extra Case Fans: Enermax TB Silence UCTB14 140mm Performance Cooling with Low Noise Profile Fan

Noise Reduction (in studio): Sound Absorbing Foam on Side, Top And Bottom panels, and more
Power supply and fan gaskets

CPU: Intel Core i7-4790K 4.0 GHz 8MB Intel Smart Cache LGA1150

CPU / Processor Cooling Fan: Asetek 550LC 120mm Liquid Cooling CPU Cooler - Extreme Cooling Performance (Dual Corsair Air Series AF120 Performance Edition Fan (Push-Pull))

Motherboard: ASUS Z97-K ATX w/ Intel GbLAN, 2 PCIe x16, 2 PCIe x1, 2 PCI, 1 x M.2, 6x SATA 6Gb/s

Intel Smart Response Technology: 64GB ADATA SP900 SATA-III 6.0Gb/s - 550 MB/s Read & 505 MB/s Write (Single Drive) Faster response of computer compared to using just one hard drive.

RAM / System Memory: 16GB (8GBx2) DDR3/1866MHz Dual Channel Memory (Corsair Vengeance CAS9)

Graphics: EVGA FTW Edition NVIDIA GeForce GTX 970 ACX 2.0 4GB GDDR5 PCIe 3.0 x16 Video Card(Single Card)

Power Supply: 850 Watts - Corsair CSM Series CS850M 80 Plus Gold Certified Modular Ultra Quiet Power Supply

Hard Drive: 1TB Western Digital Caviar Black SATA-III 6.0Gb/s 7200 RPM HDD (Single Drive)

Optical Drive: LG 14X Internal Blu-ray Burner, BD-RE, 3D Playback DVD+RW Combo Drive

Sound: HIGH DEFINITION ON-BOARD 7.1 AUDIO

External Sound: Emu 1820M Audio Interface for studio sound.

Flash Media Reader/Writer: All-in-One External USB 2.0 Card Reader/Writer

Operating System: Microsoft Windows 7 Professional (64-bit Edition)

Total cost around $1500
Also getting a Velociraptor drive possibly. Will see how things go.

 

[DaGSpotSoldier]

Decided to go with a different build: Here she is with pics. More photos coming.
That is not where the computer will stay, still running tests, and overclocking.
Monitors are pulled forward and have a location on the floor if mixing/mastering.
I have a whole back wall with other monitoring setup as well.

My Comp Build PC Parts Picker: (not the prices I paid, or where I purchased)
Intel Core i7-4790K, MSI GeForce GTX 970, NZXT Phantom 530 (Red) - System Build - PCPartPicker

Additional:
2) Cooler Master MegaFlow 200 - Sleeve Bearing 200mm Red LED Silent Fan
One up front, and One up top.
COOLER MASTER Megaflow 200 R4-LUS-07AR-GP Case Fan - Newegg.com
COOLER MASTER Megaflow 200 R4-LUS-07AR-GP Case Fan - Newegg.com

2) 120mm for bottom(using red rings of course)
Corsair Air Series SP120 Quiet Edition CO-9050006-WW
120mm Twin Pack High Static Pressure Case Fan
Corsair Air Series SP120 Quiet Edition CO-9050006-WW 120mm Twin Pack High Static Pressure Case Fan - Newegg.com

1) 140mm for side panel
Corsair Air Series AF140 CO-9050017-RLED 140mm Red LED
Quiet Edition High Airflow Fan
Corsair Air Series AF140 CO-9050017-RLED 140mm Red LED Quiet Edition High Airflow Fan - Newegg.com


I will be doing a full photo shoot soon, as well as all the pics of the build, when I get some time.
Here are some quick shots...
The computer is fully setup, just have to install some
other programs. The computer will not be on that glass table, it will be going under the desk on its platform.
I have some rubber feet that its stock feet will be sitting on, bringing the bottom up 2 inches more in height.
The Dell Inspiron music production computer is on the left, under the desk, peeking out under the chair.
This is a finished basement. 25'x13'x8'. Acoustically tuned and treated by me using acoustic measurement equipment
that I have. Setup for mixing/mastering audio, and vocal recording can be done anywhere, but I have a place for that as well.

Floor to ceiling corner bass traps with 32" face, wall and ceiling panels, front wall custom built @ 9" thick.