noob wanting some tts

[R4mPaGe]

i wanna start scratching and spinning on vinyl i dont know which tables i should get i wanna buy a package where i can get everything ive been looking at the djlab.3 and i just saw this numark package the numark dj in a box (http://www.wwbw.com/Numark-DJ-In-A-Box-v.-6-DJ-Pack-i79385.music) are thiese any good to start off with or is there any better packages for around 400?
thanks!

 

[Pure Hype Production]

If you want to scratch and cut you want to stay away from belt drive turntables. You need direct drive. Numark does make direct drive turntables that are real good so look for a package from them with direct drive tables.

The best turntables you can buy are Technics SL1200MK2 however they are real expensive.

I started out years ago with Gemini tables and they were pretty good check out the link below
http://www.numark-dj.com/item--MF.800197

Stanton is good also http://www.numark-dj.com/item--TR.DJLAB2

These seem to be in your price range.

And dont forget ebay they always have good deals on full DJ packages. Just remember you want direct drive not belt drive and you will be set.