I recently bought a pair of numark ttx1s off the internet (second hand), and everything was fine for about a month. After that, every now and then, during scratching or mixing, one of the turntables would just stop, and even if i pressed start again, it would just remain still. If i turned it off and gave it about 10mins, when i turned it on and pressed start it was ok. Half a month on, and no matter what i do, the turntable just will not move. It turns on ok, and the lcd screen picks up the platter on the electromagnet (it turns on the lcd screen if i move it), but the goddamn platter wont move no matter what. Has anyone had this problem with their ttx's before, or similar problems on any other decks? Any help would be MUCH appreciated because i have a gig coming up, and minus a turntable, i think ill probably find it very difficult. Cheers
PS. i read other peoples posts about problems with the ttx's lcd screen flashing as if the platter has been removed. Mine doesnt do this, so i guess the problem may be something more to do with the motor than the magnet, as its being picked up and is displayed as i turn it by hand.