Computer/MPC1000/Triton Setup

**tray2100** · 11-25-2006

I got pro tools (mpowered) on the computer and i connected to my mpc and the other set of ports on my mpc to my triton. When I run a sequence from the triton it activates everything after it but when I run a sequence from the computer, it only activates the MPC. I checked the sync settings and I have them correct (Sync In = 2 [the computer]) and (Sync out = AB [just to be safe but B is the triton]) is there anything else i'm missing??? Soft-thru is OMNI-AB and i'm receiving signals on all MIDI channels. Please let me know what i should try next....

**mano 1** · 11-25-2006

please please watch the show I made about this EXACT question.

Tutorial: Synchronizing AKAI MPC and KORG Triton to a Computer / DAW

.... FP has a ton of content already posted (1 million posts!!!!!!!!!!!!)... if you use the search you can find a TON of help already

good luck.

**tray2100** · 12-02-2006

hey mano, in your tutorial is your triton hooked up as slave to your MPC or is it connected to your MIDISPORT that i saw.... my issue is i wanted to daisychain my equipments .... head->computer->MPC->Triton<-end which makes the triton more or less a sound bank. I don't think the midi clock transmits through the MPC... Am I wrong?