Great River ME 1NV and FMR RNC 1773 setup HELP :(

I am trying to connect my FMR 1773 to my Great River ME1NV mic preamp, and then into my Focusrite Scarlett 18i8 interface (1st gen).

I was wondering how you all would go about setting this up?

Just didnt know exactly which cables to buy, or if I would need a patch bay.

I have included pics below so you all can see the outputs & inputs. :)

Thanks in advance Future Producers community!

(posted in a couple forums cause I didnt know which one to post this question in!)

FMR RNC 1773
http://eos-web.net/ftp_newgroove/images_big/5008.jpg

Great River ME 1NV
http://www.long-mcquade.com/files/531/lg_ME-1NV.jpg

Focusrite Scarlett 18i8
http://www.mitrosmusic.com/media/inlineimage/upload_23675_1.jpg
 
Mic -> XLR-XLR -> Great River -> TS 1/4"-TS 1/4" -> RNC mono input -> TS 1/4"-TS 1/4" -> Scarlett line ins

...if you want everything inline, that is. If you want the comp as a separate external effect to be fed from the DAW, you'd need an interface with more than two outputs.
 
Last edited:
Mic -> XLR-XLR -> Great River -> TS 1/4"-TS 1/4" -> RNC mono input -> TS 1/4"-TS 1/4" -> Scarlett line ins

...if you want everything inline, that is. If you want the comp as a separate external effect to be fed from the DAW, you'd need an interface with more than two outputs.

Much appreciated bud. I was just confused about the TS part, another gentleman on a different forum had mentioned using TRS instead. Would that also work? Thanks again!
 
You can use either, depending on how you want to set it up. If you use the ME-1NV's patch i/o, you can indeed connect it with a single cable to the RNC's input (thus using it in "insert mode") & then have the Great River's output go straight to the Scarlett.
 
Back
Top