http://www.futureproducers.com/forums/ Cubase VST, Cakewalk, Logic, etc.. Discuss here! en Sat, 25 May 2013 17:59:01 GMT vBulletin 60 http://www.futureproducers.com/forums/images/misc/rss.png http://www.futureproducers.com/forums/ http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/question-about-sonar-x2-444198/ Sat, 25 May 2013 08:22:32 GMT *How do you apply effects to a certain part of a track? When I highlight the part I want effected... How do you apply effects to a certain part of a track? When I highlight the part I want effected the menu grays out and when I just apply the effect it covers the whole track. Any Sonar users that can help? ]]> DAW Sequencers / Samplers (Software) Married Gunslinger http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/question-about-sonar-x2-444198/ http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/fl-studio-snap-grid-problem-midi-input-recording-444190/ Sat, 25 May 2013 06:28:21 GMT Ive been trying to get my head around this for hours now and after combing and combing through the... Ive been trying to get my head around this for hours now and after combing and combing through the internet and forums ive given up.

Suddenly for no reason, the snap to grid feature doesnt work when i try midi input recording in piano roll (drawing and painting notes with my mouse works fine).
The beginning and end of the notes are supposed to snap to the nearest grid (given that the snap to grid is selected e.g 'main' 'line' 'step' etc
, but it doesnt, and instead records the notes as if the snap to grid on the piano roll was set to 'None', thus theres no quantization going on.
BUT, the funny thing is that AFTER the recording is finished when i try to move the notes with my mouse, they move at correct intervals (line at a time)
as if the snap setting were set correctly, although this means the notes are still off the grids.

Things ive tried:
-Tried putting EVERY Snap to grid selection option to MAIN, LINE. the global snap setting too...
-Checked Audio settings - Playback tracking - Offset. Set to 0.
-Checked if its latency issues. Its not.
-Tried resetting FL Studio settings completely

After all this, the snap to grid setting is not behaving like its supposed to.
Please help.. ]]> DAW Sequencers / Samplers (Software) luxslash http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/fl-studio-snap-grid-problem-midi-input-recording-444190/ http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/live-9-metronome-question-444164/ Fri, 24 May 2013 19:37:47 GMT Is there a way to automate the metronome volume as it were. I have a piece that slows down at the... Is there a way to automate the metronome volume as it were. I have a piece that slows down at the end, I am recording a live Harp. so the metronome is keeping me in time but I need to slow down at the end. Of course I could enable a foot switch to turn off the metronome but I thought there may be another way. If I could record the metro. on an audio track I could use automation to fade it out. It very hard to slow down a piece with the metronome hammering away in my ear, Just upgraded to live 9 love it :) ]]> DAW Sequencers / Samplers (Software) abritabroad http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/live-9-metronome-question-444164/ http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/exporting-ableton-weird-noise-beginning-%5Bhelp%5D-444130/ Fri, 24 May 2013 13:54:43 GMT So, I usually export my tracks at 48khz/32 bit. Yesterday for whatever reason, you know that random... So, I usually export my tracks at 48khz/32 bit. Yesterday for whatever reason, you know that random combination of synths that plays right after an export is done? It usually does that to me, though now that noise occurs when I play the track in the beginning. It's only for a second or two, but it's really detrimental to my tracks. Does anyone know why this is happening? ]]> DAW Sequencers / Samplers (Software) ArctiK http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/exporting-ableton-weird-noise-beginning-%5Bhelp%5D-444130/ http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/exporting-my-ableton-project-into-reason-mixing-audio-effects-etc-444116/ Fri, 24 May 2013 06:33:20 GMT is there anyway I can export my Ableton project(without compression, eq's, effects etc) into reason and deal with all that shit in there? I really am not too fond of Abletons audio effects and processing selection.

Or with Cubase... which ever one works ]]> DAW Sequencers / Samplers (Software) freedoom http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/exporting-my-ableton-project-into-reason-mixing-audio-effects-etc-444116/ http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/get-40%25-off-all-sample-packs-r-loops-com-443706/ Sun, 19 May 2013 17:35:12 GMT Attachment 38960 (http://www.futureproducers.com/forums/attachments/daw-sequencers-samplers-software/38960-get-40%25-off-all-sample-packs-r-loops-com-r-loops_-_sale40.png)* Get 40... r-loops_-_SALE40.png
Get 40 % Off for all sample packs / loops / construction kits on r-loops shop!.
Available until May 31'st!
Discount code: GET40OFF


Just use the voucher code “GET40OFF” on the r-loops checkout page, and your selected products will automatically receive discount.


www.r-loops.com ]]> DAW Sequencers / Samplers (Software) rafik http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/get-40%25-off-all-sample-packs-r-loops-com-443706/ http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/fl-studio-cubase-7-a-443251/ Tue, 14 May 2013 21:21:27 GMT Hi, ive been struggling to make the conversion from FL Studio 10 to Cubase 7... Hi, ive been struggling to make the conversion from FL Studio 10 to Cubase 7. I currently decided I wanted to do the switch permanently, and intuitively i know this is the right software for me. With that being said , there are some obstacles ive running across. For some strange reason it wont recognize my Waves bundle, and some vst's. Ive also had some problems with the quantize option , when recording live via midi. I would record live via midi, and I would recognize that it doesnt record properly, and does some auto quantize crap.

Im just looking for a guide and some help and guidance for me to get back into producing music, and be able to get a grasp of Cubase 7.


Thank You ]]> DAW Sequencers / Samplers (Software) kartikt http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/fl-studio-cubase-7-a-443251/ http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/ableton-live-9-vs-presonus-studio-one-2-5-a-443025/ Sun, 12 May 2013 21:22:19 GMT Is there anyone out there who has used BOTH and can say something about the pros and cons? I tried... Is there anyone out there who has used BOTH and can say something about the pros and cons? I tried the demos for both and, being a total noob, i really can't say which one i would be happier with in the long run... Thnks guys! ]]> DAW Sequencers / Samplers (Software) firefart http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/ableton-live-9-vs-presonus-studio-one-2-5-a-443025/ http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/trying-get-my-bcf-into-mackie-mode-442532/ Wed, 08 May 2013 01:24:03 GMT Normal 0 ...]]> I am using USB Cable. I cannot get the BCF2000 to change to Mackie or any of the other modes. I hold down the 2nd button, power up and it briefly shows 3 numbers NOT letters and then goes to P-1. I also downloaded new drivers for 64 bit as well. I really appreciate the help....Trust me I read everything prior to bugging the forum.


]]> DAW Sequencers / Samplers (Software) abritabroad http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/trying-get-my-bcf-into-mackie-mode-442532/ http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/%5B1998%5Dfruity-loops-1-0-%5Breleased-image-line%5D-442486/ Tue, 07 May 2013 18:42:33 GMT (Not sure if anyone has posted this yet but I'm too tired to go through tons of threads to check so here you go)
Before I start: Hi to all you dear moderators that are getting ready to swing that ban hammer, please take a look @ this :) : FL Studio 1.0 - History as you can see Image Line is giving it out for free meaning that I'm not giving out anything ~*~ILLEGALLY~*~

However, in order to obtain it you have to register on their website since otherwise you can't view attachments so I uploaded it on divshare to save everyone 5 minutes of their time fruityloops_1.zip - DivShare

I haven't been able to open the program yet due to the fact that my computer is something like a fusion between Brian Scalabrine and Jed Buechler

Now with that being said, let's take those beats to the next level! :cool:

:cheers: ]]> DAW Sequencers / Samplers (Software) Luka95 http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/%5B1998%5Dfruity-loops-1-0-%5Breleased-image-line%5D-442486/ http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/brand-new-daw-producers-its-open-source-too-442416/ Tue, 07 May 2013 02:01:12 GMT So, my friend and I thought of a pretty good idea - an Open Source DAW. I have assembled a (so far)... So, my friend and I thought of a pretty good idea - an Open Source DAW. I have assembled a (so far) small team of programmers and testers. We are still laying down the framework, but we need funds for a lot of different reasons, as listed on the indiegogo campaign. Check it out if this sounds interesting to you - help us make it go viral! WE WOULD REALLY LIKE TO SEE THIS BE THE NEW FL STUDIO OR PRO TOOLS!
MakeMosik: The Open Source DAW | Indiegogo ]]> DAW Sequencers / Samplers (Software) VMO http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/brand-new-daw-producers-its-open-source-too-442416/ http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/ableton-bcf2000-442271/ Sun, 05 May 2013 17:34:56 GMT Normal 0 ...]]> Having had my bcf2000 for a month or two I have one question! I am using the default BCF2000 setting in live. The arm tracks leds only respond to my mouse on the screen. When I press the arm tracks button nothing happens, I have to grab my mouse to arm / disarm. The leds do light up correctly. am I missing something? The encoders are working fine, IAccording to the live lessons the lower row arm the tracks but not for me yet. jSorry to ask a newbie question..Things have come a long way since I was recording in London on the Ampex reel to reel in the late 1960's Thankyou so much for reading this J



]]> DAW Sequencers / Samplers (Software) abritabroad http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/ableton-bcf2000-442271/ http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/ableton-live-tempo-automation-audio-export-442240/ Sun, 05 May 2013 06:10:26 GMT I have an audio track with a long audio file on it and I placed clips with tempo automation... I have an audio track with a long audio file on it and I placed clips with tempo automation throughout the project on a separate MIDI track at certain places where I want the tempo to change. If I listen to it within Live I can hear all the tempo changes and it sounds how it's supposed to but if I export its the same tempo throughout the entire track.

This is probably a simple fix but when I search the internet all I get is people who can't figure out why 'warp' is changing the tempo of their track when they drop it in Live.

Thanks!

---------- Post added at 02:10 AM ---------- Previous post was at 01:58 AM ----------

The absence of an audio editor in Live is the most upsetting thing...

I did figure it out though. I had to click the 'back to arrangement button. I guess when I played through the track recording the automation was saved and I could now get rid of the clip with midi automation. ]]> DAW Sequencers / Samplers (Software) alltrue http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/ableton-live-tempo-automation-audio-export-442240/ http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/digital-performer-windows-version-coming-442201/ Sat, 04 May 2013 21:08:42 GMT MOTU.com - Digital Performer does Windows... MOTU.com - Digital Performer does Windows

:victory: :victory: :victory: :victory: :victory: :victory: :victory: :victory: :victory: :victory: :victory: :victory: :victory: :victory: :victory: :victory: :victory: :victory: :victory: :victory: :victory:

I finally get a chance to try this out for myself. Always wanted to try it. ]]> DAW Sequencers / Samplers (Software) 901_Rice_Street http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/digital-performer-windows-version-coming-442201/ http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/lives-secret-option-show-device-slots-441828/ Wed, 01 May 2013 16:19:20 GMT Hi, this is a great tip, so I made it Tip of the month on my website. Only takes 5 minutes and it's very handy. The tut also tells you about another one, Live's hidden Device Menu.

Tip Of The Month ? Features ? MacAbleton

Happy May Day! ]]> DAW Sequencers / Samplers (Software) funken http://www.futureproducers.com/forums/hardware-software/software/daw-sequencers-samplers-software/lives-secret-option-show-device-slots-441828/